Embroidery Machines
Embroidery Machine Thread Keeps Breaking - How to Fix It
Thread breaking mid-design is one of the most common embroidery machine problems but is almost always fixable at home - work through these steps to find the cause and get back to stitching
Embroidery Machine Thread Bunching or Bird's Nesting - How to Fix It
Embroidery machine thread bunching or bird's nesting underneath your hoop is almost always caused by the upper thread rather than the bobbin - here's how to identify the cause and fix it quickly
Embroidery Machine Fabric Puckering - How to Fix It
Fabric puckering around your embroidery design is one of the most common embroidery machine problems and is almost always down to hooping, stabiliser or tension - here's how to identify the cause and fix it.
Embroidery Machine Skipped Stitches - How to Fix It
Gaps in your embroidery design are almost always caused by the needle, threading, hooping or stabiliser - work through these steps in order and you'll have clean, unbroken stitches again quickly.
Embroidery Design Not Aligning - How to Fix It
If your embroidery design isn't stitching out in the right position or colours aren't lining up with each other, it's almost always a hooping or stabiliser issue - here's how to fix it.
Embroidery Machine Needle Breaking - How to Fix It
A breaking needle mid-design is almost always caused by something in your setup that's easy to identify and fix - here's how to deal with it safely and prevent it from happening again.
Bobbin Thread Showing on Top of Embroidery - How to Fix It
If the bobbin thread is showing on the top of your embroidery it's almost always an upper threading or tension issue - here's how to identify the cause and get your stitches looking clean again.
Hoop Marks on Fabric - How to Prevent and Remove Them
Hoop marks on fabric are one of the most common embroidery frustrations but are almost always preventable and usually removable - here's how to treat them and stop them happening again.
Embroidery Machine Making Unusual Noises - How to Fix It
If your embroidery machine has started clicking, grinding, clunking or squealing, it's telling you something needs attention - work through these steps to identify the cause and get it running quietly again.
Embroidery Machine Stopping Mid-Design or Showing Error Messages
When your embroidery machine stops unexpectedly mid-design or displays an error message, it's almost always one of a handful of straightforward causes - here's how to work through them and get back to your project.